Vacuum Emulsifying Unguent Machine

Vacuum Emulsifying Unguent Machine

Short Description:


Product Detail

Product Tags

Composition:

The vacuum emulsifying unguent machine is mainly composed of main pot, water pot, oil pot, filler bin, mixing system, cooling system, vacuum system, jacking system, contrl system and rack platform.

Quality assurance:

One year warranty.
Life long service.
Engineer available to service abroad.

Working Principle:

The liquid raw materials are first pre-resolved and dispersed in water pot and oil pot, then got into the emulsification boiler by the vacuum pump; powder lots are in the filler pin with air-hammer on the bottom of one side, it can distroy wall-scaling and make the powders are driven in the main pot completely, ensuring an accurate ratio of the raw materials. Powders are sucked into the main pot by vacuum system. The high- power scraped wall mixing box guarantees an intensive mixing of the materials. The high-speed homogeneous dispersing ring will break uo the materials and powders thoroughly. Trace element inlet is equiped on the side of main pot to mix them into the material without waste. Grinding miller can be set into the pot optionally to refine the materials. During the production process, cooling water in the jacket will cool down the temperature, and bubbles will be removed by vacuum defoamation.

Range of Application:

Toothpaste, shaving cream, viscous pastes.

Name

Configuration

Main pot

Design volume (L)

65

Capacity (L)

50

Scraper stirring power (kw)

0.75

Scraper stirring speed (rpm)

48

Homogenizer power (kw)

1.5

Homogenizer speed (rpm)

940

Vacuum pump power

2.2

Water pot

Design volume (L)

39

Capacity (L)

31

Power (kw)

0.55

Speed (rpm)

1400

Oil pot

Design volume (L)

33

Capacity (L)

17

Power (kw)

0.55

Speed (rpm)

1400

Filler bin

Volume (L)

80

Stirring power (kw)

0.75

Pneumatic hammer

FP-50

Name

Configuration

Main pot

Design volume (L)

100

Capacity (L)

80

Scraper stirring power (kw)

1.5

Scraper stirring speed (rpm)

43

Homogenizer power (kw)

2.2

Homogenizer speed (rpm)

940

Vacuum pump power

3

Water pot

Design volume (L)

60

Capacity (L)

48

Power (kw)

0.55

Speed (rpm)

1400

Oil pot

Design volume (L)

50

Capacity (L)

40

Power (kw)

0.55

Speed (rpm)

1400

Filler bin

Volume (L)

80

Stirring power (kw)

0.75

Pneumatic hammer

FP-50

Name

Configuration

Main pot

Design volume (L)

300

Capacity (L)

250

Scraper stirring power (kw)

3

Scraper stirring speed (rpm)

33

Homogenizer power (kw)

5.5

Homogenizer speed (rpm)

960

Vacuum pump power

4

Water pot

Design volume (L)

180

Capacity (L)

145

Power (kw)

0.75

Speed (rpm)

1400

Oil pot

Design volume (L)

150

Capacity (L)

120

Power (kw)

0.75

Speed (rpm)

1400

Filler bin

Volume (L)

280

Stirring power (kw)

3

Pneumatic hammer

FP-50

Name

Configuration

Main pot

Design volume (L)

700

Capacity (L)

560

Scraper stirring power (kw)

4

Scraper stirring speed (rpm)

33

Homogenizer power (kw)

11

Homogenizer speed (rpm)

970

Vacuum pump power

5.5

Water pot

Design volume (L)

420

Capacity (L)

336

Power (kw)

1.5

Speed (rpm)

940

Oil pot

Design volume (L)

350

Capacity (L)

280

Power (kw)

1.5

Speed (rpm)

940

Filler bin

Volume (L)

650

Stirring power (kw)

5.5

Pneumatic hammer

FP-63

No.

Specification/Name

Main Parameters

Remarks

1

Capacity

1000L

2

Working Pressure (in the pot)

≤0.1MPa

3

Pot

Name

Material

Thickness(mm)

Inner layer

SUS304

10

Outer layer

SUS304

4

4

Fast Dissolving Mixer

2 sets

Power:22kw

Rotating Speed:0-1000r/min

Frequency

5

Scraper Stirrer

Power:5.5Kw

Rotating Speed:0-20r/min

Frequency

6

Vacuum Degree inside the pot

-0.096~-0.098MPa

7

Vacuum Pump

Water Ring Vacuum Pump(Vacuum Degree -0.096MPa)

Power:5.5Kw

8

Dimensions(Length * Width * Height)mm

Before opening the cover:

2760×1560×3230

After opening the cover:

2760×1560×4330

9

Electronic control system

Push button control

10

Total Weight

~4100kg


  • Previous:
  • Next:

  • Related Products